Why Schlage Keypad Lock Keeps Spinning? [Fixes] for BE365, BE468 & More

Why Schlage Keypad Lock Keeps Spinning? [Fixes] for BE365, BE468 & More

by

You’re trying to use your Schlage keypad lock, but it keeps spinning. This can be frustrating, especially if you don’t know why it’s happening or how to fix it.

There could be many reasons why your Schlage keypad lock is not working properly. But don’t worry, this guide will help you troubleshoot the issue and get your lock back to normal.

In this guide, we will show you some common issues that can cause a Schlage keypad lock to keep spinning. We will also provide fixes for each issue.

Table Of Contents
  1. Why Schlage Keypad Lock Keeps Spinning?
  2. What causes the spinning problem with Schlage Keypad Lock?
  3. How can you fix the spinning problem with the Schlage Keypad Lock?
  4. How To Fix A Schlage Keyless Door Lock That Keeps Spinning
  5. FAQs

Why Schlage Keypad Lock Keeps Spinning?

If a Schlage keypad lock keeps spinning, it is likely due to an issue with the batteries. Replacing the batteries is the first step in troubleshooting this issue. If the problem persists after replacing the batteries, a factory reset may be necessary.

What causes the spinning problem with Schlage Keypad Lock?

The spinning problem with Schlage Keypad Lock is caused by an old lock, installation mistakes, or a broken component. If the problem persists after a reset, the lock might have been installed wrongly. If the batteries in your Schlage keypad lock are bad, the lock may start spinning. If the batteries in your Schlage keypad lock are cold, the lock may also start spinning. You can usually fix this problem by replacing the batteries or warming up the batteries.

How can you fix the spinning problem with the Schlage Keypad Lock?

Step 1: Change the Batteries

If the red light on your Schlage keypad is blinking fast, it means that one of the batteries needs to be replaced. You only need to replace the old AA batteries with new ones and put back the battery cover. Make sure your lock has fresh batteries before starting the diagnostic and repair process.

Here is a video on how to change the battery of your Schlage keypad lock easily:

Step 2: Restore Default Settings on the Lock

If you ever have problems with your Schlage lock, you can reset it to its factory settings. To do this, remove the battery, press and hold the Schlage button, and then reconnect the battery. If resetting your lock doesn’t work, try deleting all codes previously entered. You can also try contacting a locksmith or taking the lock to a local hardware store.

Here is a video on how to restore your Schlage keypad lock to factory settings:

Step 3: Reinstall the Lock

If you have a Schlage lock and are experiencing problems with it, try reinstalling it properly and contacting customer support if needed.

Here is how to reinstall your Schlage keypad lock:

How To Fix A Schlage Keyless Door Lock That Keeps Spinning

1. Check The battery level, charge or replace

If your Schlage keypad lock keeps spinning, the batteries may need to be replaced. Check the battery level and, if necessary, charge or replace the batteries.

2. Ensure proper Installation Of The Lock System

It is important to ensure that the Schlage Keypad Lock is properly aligned and secure before starting the installation process. There are no electrical wirings involved in the installation process, so refer to the instruction manual for further guidance. If you are having issues with your lock, make sure to check that it is properly set up first.

You should be sure to lock your deadbolt in the locked position and unlock it in the unlocked position. You need to follow different processes depending on whether or not the Turn Lock/Lock and Leave feature is activated. Refer to your User Manual if you’re not sure whether it’s safe to lock your keypad or if you need extra security by locking the deadbolt.

3. Replace the Defective Or Jammed Deadbolt

If you are having difficulty with your Schlage Keypad Lock, it may be due to a defective or jammed deadbolt. The simplest solution is to tap the lock with a hammer. If this does not work, unscrew the deadbolt and check the disc. You may need to replace the disc if it is worn out. If you cannot find an identical replacement model, you will need to buy a new lock.

FAQs

What happens if Schlage Lock runs out of battery?

If the batteries in your Schlage Lock are low, the lock will blink red consistently. If you don’t see red flashes on your lock, it’s probably time to replace the batteries.

How do you know when the Schlage battery is low?

If your Schlage keypad lock is not working properly, it is likely that the batteries are low. To check the battery level, press and hold the Schlage button on the lock for three seconds. If the LED flashes red, this indicates that the batteries should be replaced.

How often should you change the battery in a Schlage keypad lock?

It is recommended that you change the battery in a Schlage keypad lock when the red flashes start appearing on the lock.

Why does my Schlage Lock keep blinking green?

If the light on your Schlage Lock turns from red to blinking green, it means you have entered the right user code.

What should you do if a Schlage keyless door lock spins and doesn’t engage?

If a Schlage keyless door lock doesn’t engage, the first thing you should try is resetting the lock. To do this, make sure that the power is turned on to the lock, then press and hold the Lock Release Button for three seconds. Finally, release the Lock Release Button. If this doesn’t fix the problem, you may need to replace the lock.

Why does my Schlage deadbolt key just spin back and forth?

The Schlage deadbolt key just spins back and forth because the combination lock is not working correctly.

What to do if Schlage be365 just spins?

If your Schlage keypad lock keeps spinning, you might need to replace the batteries or reset it. If the problem persists after resetting, there may be a problem with the lock itself and it needs to be replaced. Problems with Schlage Keypad Locks can include spinning and not locking/unlocking. To fix the issue, remove the lock from the door and install it properly.

Latest posts by Angel (see all)

Related posts:

  1. Can You Use Schlage Sense Without WiFi?
  2. Why Your Schlage Sense Wi-Fi Adapter Won’t Connect? (Fix it Now)